Maxim-integrated 78M6618 PDU1 Firmware Manual do Utilizador

78M6618 PDU1 Firmware Quick Start Guide July 2012 Rev. 0 UG_6618_122

78M6618 PDU1 Firmware Quick Start Guide UG_6618_122 10 Rev.0 3.3 Rebuilding the Application The application can be built with or without inclusio

UG_6618_122 78M6618 PDU1 Firmware Quick Start Guide Rev. 0 11 3.4 Downloading the *.abs File to the Target The ADM-51 Emulator is used to downlo

78M6618 PDU1 Firmware Quick Start Guide UG_6618_122 12 Rev.0 4 Getting Started with Flash Programming 4.1 Via the GUI If the Firmware includes

UG_6618_122 78M6618 PDU1 Firmware Quick Start Guide Rev. 0 13 3. On the BootLoader tab, click the Load New Hex File button and select the hex file

78M6618 PDU1 Firmware Quick Start Guide UG_6618_122 14 Rev.0 4.2 Via theTFP2 Flash Programming Tool Refer to the Flash Programmer Model TFP2 U

UG_6618_122 78M6618 PDU1 Firmware Quick Start Guide Rev. 0 15 4. Wait for the hex file to get transferred to TFP2 internal EEPROM. Once complete

78M6618 PDU1 Firmware Quick Start Guide UG_6618_122 16 Rev.0 5. To program the device’s flash using the flash image that was just programmed in t

UG_6618_122 78M6618 PDU1 Firmware Quick Start Guide Rev. 0 17 4.3 Via the ADM-51 Emulator Refer to the Signum System ADM-51 Emulator documentation

78M6618 PDU1 Firmware Quick Start Guide UG_6618_122 18 Rev.0 5. Browse using the Hex File Type, or ABS file type (see Section 3.4). 6. Click

UG_6618_122 78M6618 PDU1 Firmware Quick Start Guide Rev. 0 19 5 Contact Information For more information about the 78M6618 or other Maxim products

Table of Contents 1 Introduction ...

UG_6618_122 78M6618 PDU1 Firmware Quick Start Guide Rev. 0 3 1 Introduction The 78M6618 PDU1 Firmware is a turnkey energy measurement solution opt

78M6618 PDU1 Firmware Quick Start Guide UG_6618_122 4 Rev.0 1.1 What’s Included with an EVK? The PDU1 Evaluation Kit (EVK) includes the 78M6618 P

UG_6618_122 78M6618 PDU1 Firmware Quick Start Guide Rev. 0 5 1.2 What’s included with an SDK? The SDK contains all the required elements for a var

78M6618 PDU1 Firmware Quick Start Guide UG_6618_122 6 Rev.0 1.3.2 Compiler and Integrated Development Environment (IDE) Maxim recommends using th

UG_6618_122 78M6618 PDU1 Firmware Quick Start Guide Rev. 0 7 1.3.4 TFP2 Flash Programmer The Signum ADM-51 can serve as a programmer for prototypi

78M6618 PDU1 Firmware Quick Start Guide UG_6618_122 8 Rev.0 2 Getting Started with the EVK This section describes the necessary steps to get the

UG_6618_122 78M6618 PDU1 Firmware Quick Start Guide Rev. 0 9 3 Getting Started with the SDK 3.1 Required Hardware and Software Development Tools