Maxim-integrated 73S12xxF Software Manual do Utilizador descarregar pdf (Página 38)

73S12xxF Software User Guide UG_12xxF_016

38 Rev. 1.50

IccLastByte should be set when it is time to switch to transmission mode and start the BGT timer. If it is not

immediately known when it is time to switch, call ICC_RxDone() after all the bytes have been received.

To determine if all the expected bytes have been received, call ICC_RxLen(). Since the ICC_OK or

ICC_BREAK status occurs after reception of ICCLen bytes, this value should include any CRC/LRC

byte(s) received.

ICC_RxLen()

Purpose Return the number of bytes received thus far.

Synopsis unsigned Int ICC_RxLen ( void );

Parameters None.

Return Codes None.

ICC_RxDone()

Purpose Notify the SmartCard UART that all the expected bytes have been received. This

forces the switch to activation of block guard and wait times.

Synopsis Void ICC_RxDone ( void );

Parameters None.

Return Codes None.

ICC_Deactivate()

Purpose Deactivate the contacts of the selected SmartCard interface as specified by IccId.

The Vcc, RST, I/O and Clk signals are configured according to the ISO 7816-3

standard. This function uses the IccVCCOffDelay, as described in ICC_Activate()

before turning VCC off.

Synopsis void ICC_Deactivate ( void );

Parameters None.

Return Codes None.

ICC_Mode()

Purpose Enable or Disable PC (via DIRECT mode) or Application (via Bypass mode) to

directly control ICC I/O line.

Synopsis ICC_RC ICC_Mode (

IN enum ICC_ID Iccid,

IN Boolean bEnable,

IN Boolean bPC_DIRECT )

Parameters IccId : Input parameter

Specifies which SmartCard to allow direct access to I/O. Possible values are:

ICC_1ST 0, (Internal)

ICC_2ND 1, (External)

…

ICC_9TH 8 (External).

bEnable: Input parameter

If TRUE, it enables the selected mode.

bPC_DIRECT: Input parameter

Enables or disables PC_DIRECT mode (if TRUE) or BYPASS mode (if FALSE).

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 92 93

Comentários a estes Manuais

Sem comentários

Maxim-integrated 73S12xxF Software Manual do Utilizador Página 38

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Maxim-integrated 73S12xxF Software