Maxim-integrated MAX78630+PPM Evaluation Kit Manual do Utilizador descarregar pdf (Página 20)

MAX78630+PPM Evaluation Kit User Manual

20 Rev 0

4.1.5 Command and Configuration Tab

The Command and Config tab controls two frequently used registers:

• Get and Set Command Register: These buttons essentially do the same thing as the direct register

reads and writes, but specifically for the command register while the Direct tab is for any pother

registers that need to be accessed. Hex and decimal formats are supported.

•

Get and Set Configuration Register: These buttons are used to set up the measurement configurations

for the MAX78630+PPM. Refer to the IC data sheet Section 2.19 for details on how this is used. The

configuration must be configured before the MAX78630+PPM is used by getting the default

configuration and setting it. Once this is done it can be saved to NV RAM for future use, or

programmed to a user-defined configuration and saved. See the Calibration tab for saving the

settings.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Sem comentários

Maxim-integrated MAX78630+PPM Evaluation Kit Manual do Utilizador Página 20