Maxim-integrated MAX31782 Manual do Utilizador Página 96

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 223
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 95
Maxim Integrated 11-2
MAX31782 User’s Guide
Revision 0; 8/11
SECTION 11: GENERAL-PURPOSE INPUT/OUTPUT (GPIO) PINS
The MAX31782 provides general-purpose input/output (GPIO) functionality on 21 pins. In addition to the GPIO function-
ality, each of these pins is multiplexed with at least one other function, which is classified as either a special function
or alternate function.
Special functions override the GPIO register settings of the port pin when they are enabled. Once the special function
takes control, normal control of the port pin is lost until the special function is disabled.
Alternate functions operate in parallel with the GPIO register settings for the port pin, and generally consist of input-only
functions. When an alternate function is enabled for a port pin, the port pin’s output state can still be controlled by the
GPIO register settings, or driven by external hardware.
Table 11-1 details all the GPIO pins as well as what other functions are multiplexed with each pin. With the exception
of a few pins, which are described in further detail later, the GPIO pins operate as shown in the GPIO block diagram
(Figure 11-1
). Some of the features of these GPIO pins include the following:
CMOS output drivers
Schmitt trigger inputs
Optional weak pullup to V
DD
when operating in input mode
Figure 11-1. GPIO Pin Block Diagram
PDp.n
SF = SPECIAL FUNCTION
AF = ALTERNATE FUNCTION
THE FORMAT FOR GPIO CONTROL BITS SHOWN IS PDp.n, WHERE
p DESIGNATES THE PORT (p = 1, 2, 6)
n IS THE PORT PIN (n = 0 TO 7)
SF ENABLE
POp.x
PIp.n , SF INPUT, OR AF INPUT
SF OUTPUT
SF DIRECTION
V
DD
I/O PAD
MUXMUX
MAX31782
PIN
V
DD
WEAK*
*THE pMOS AND WEAK PULLUP TRANSISTORS ARE NOT CONNECTED
TO THE SCL, SDA, MSCL, AND MSDA PINS.
*
EIF6.m
INTERRUPTS ONLY FOR PORT6
EIE6.m
EIES6.m
DETECT
CIRCUIT
MAX31782
Vista de página 95
1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 222 223

Comentários a estes Manuais

Sem comentários