__________________________________________________________________________________________________________ 10-4
MAXQ7667 User’s Guide
Bit 3: Operand Count Select (OPCS). This bit defines how many operands must be loaded to trigger a multiply or multiply-accumu-
late/subtract operation (except when SQU = 1 since this implicitly specifies a single operand). When this bit is cleared to logic 0, both
o
perands (MA and MB) must be written to trigger the operation. When this bit is set to 1, the specified operation is triggered once either
operand is written.
0 = Both operands (MA and MB) must be written to trigger the multiplier operation.
1
= Loading one operand (MA or MB) triggers the multiplier operation.
Bit 2: Multiply Negate (MSUB). Configuring this bit to logic 1 enables negation of the product for signed multiply operations and sub-
traction of the product from the accumulator (MC[2:0]) when MMAC = 1. When MSUB is configured to logic 0, the product of multiply
operations will not be negated and accumulation is selected when MMAC = 1.
Bit 1: Multiply-Accumulate Enable (MMAC). This bit enables the accumulate or subtract operation (as per MSUB) for the hardware
multiplier. When this bit is cleared to logic 0, the multiplier will perform only multiply operations. When this bit is set to logic 1, the mul-
tiplier will perform a multiply-accumulate or multiply-subtract operation based upon the MSUB bit.
0 = Accumulate/subtract operation disabled.
1 = Accumulate/subtract operation enabled.
Bit 0: Signed-Unsigned Select (SUS). This bit determines the data type of the operands. When this bit is cleared to logic 0, the
operands are treated as two’s complement values and the multiplier performs a signed operation. When this bit is set to logic 1, the
operands are treated as absolute magnitudes and the multiplier performs an unsigned operation.
0 = Signed operands.
1 = Unsigned operands.
10.2.2 Multiplier Operand A Register (MA)
Register Description: Multiplier Operand A Register
Register Name: MA
Register Address: Module 01h, Index 01h
Bits 15 to 0: Multiplier Operand A Register Bits 15:0 (MA[15:0]).
This operand A register is used by the application code to load 16-
bit values for multiplier operations.
Bit #
15 14 13 12 11 10 98
Name MA15 MA14 MA13 MA12 MA11 MA10 MA9 MA8
Reset 0 0 0 0 0 0 0 0
Access rw rw rw rw r w rw rw rw
Bit #
76543210
Name MA7 MA6 MA5 MA4 MA3 MA2 MA1 MA0
Reset 0 0 0 0 0 0 0 0
Access rw rw rw rw rw rw rw rw
r = read, w = write
Note: This register is cleared to 0000h on all forms of reset.
(114 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais