Maxim-integrated MAXQ7667 Manual do Utilizador Página 89

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 347
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 88
__________________________________________________________________________________________________________ 5-14
MAXQ7667 Users Guide
In addition to the standard enhanced Type D GPIO port features, the MAXQ7667 offers programmable drive strength and program-
mable direction of resistive pullup or pulldown.
5.2.13 Pad Drive Strength Register (Port 0) (PS0)
Register Description: Pad Drive Strength Register (Port 0)
Register Name: PS0
Register Address: Module 00h, Index 18h
Bits 7 to 0: Port 0 Drive Strength Register Bits 7:0 (PS0[7:0]).
When the port direction register PD0 configures a particular I/O pin
as an output, the corresponding PS0 bit configures the drive strength of that output. When a PS0 bit is set to 0, the output driver is 1mA
(typical). When set to 1 the output driver is 2mA (typical).
5.2.14 Pad Drive Strength Register (Port 1) (PS1)
Register Description: Pad Drive Strength Register (Port 1)
Register Name: PS1
Register Address: Module 00h, Index 19h
Bits 7 to 0: Port 1 Drive Strength Register Bits 7:0 (PS1[7:0]).
When the port direction register PD1 configures a particular I/O pin
as an output, the corresponding PS1 bit configures the drive strength of that output. When a PS0 bit is set to 0, the output driver is 1mA
(typical). When set to 1 the output driver is 2mA (typical).
5.2.15 Pad Resistive Pull Direction Register (Port 0) (PR0)
Register Description: Pad Resistive Pull Direction Register (Port 0)
Register Name: PR0
Register Address: Module 00h, Index 1Bh
Bits 7 to 0: Port 0 Resistive Select Bits 7:0 (PR0[7:0]).
When the port direction register PD0 configures a particular I/O pin as an
input, and the corresponding PO0 register bit enables a resistive pull, PR0 controls the direction of that pull. If the PR0 bit is set to 0,
the I/O pin has a resistive pulldown of approximately 150k (typical). When the PR0 bit is set to 1, the I/O pin has a resistive pullup of
approximately 150k (typical).
r = read, w = write
Note: This register is cleared to 00h on all forms of reset.
Bit #
7 6543210
Name PS07 PS06 PS05 PS04 PS03 PS02 PS01 PS00
Reset 0 0 0 0 0 0 0 0
Access rw rw rw rw rw rw rw rw
r = read, w = write
Note: This register is cleared to 00h on all forms of reset.
Bit #
76543210
Name PS17 PS16 PS15 PS14 PS13 PS12 PS11 PS10
Reset 0 0 0 0 0 0 0 0
Access rw rw rw rw rw rw rw rw
r = read, w = write
Note: This register is cleared to FFh on all forms of reset.
Bit #
76543210
Name PR07 PR06 PR05 PR04 PR03 PR02 PR01 PR00
Reset 1 1 1 1 1 1 1 1
Access rw rw rw rw rw rw rw rw
Vista de página 88
1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 346 347

Comentários a estes Manuais

Sem comentários